Question 1

Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE

Synergy 480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb

SAS switches and two HPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third

fabric.

What must be done to enable dedicated FC connectivity for this HPE Synergy frame?

Options :

A : A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.

B : For Brocade switches, a logical interconnect group must be created in HPE OneView.

C : For VC-FC modules, all of server facing ports must be property licensed.

D : SAS switches must be moved to second fabric and FC modules Installed in the first one.

Answer: D

Question 2

You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was

configured with a Link Aggregation Group

What should you check to fix the issue?

Options :

A : if both FiexNICs are configured with the same speed

B : If the logical enclosure is built on at least three HPE Synergy frames

C : if both FiexNICs are connected to different networks

D : if the logical enclosure is configured with redundant master modules

Answer: A

Question 3

Your customer plans to deploy VMware vSAN using D3940 Storage Modules. Which statement about this solution is true?

Options :

A : The 12Gb SAS modules required for D3940 connectivity can only be installed in the first fabric.

B : To use the storage controller that will access D3940 storage modules, a second CPU must be installed.

C : For VMware vSAN deployment, all drives in the D3940 storage modules must be SSD drives.

D : All drives in the D3940 storage modules must formulate a single logical drive with RAID5 configured

Answer: C

Question 4

Your customer manages HPE Synergy using HPE OneView. For one of its projects, the company purchased 50 HPE. ProLiant DK385 Gen10 Plus v2.They plan to manage the new systems using HPE OneView as well. What should the customer do to manage rack system using HPE OneView?

Options :

A :

add the rack system to the HPE OneView instance used to manage HPE Synergy to centralize management of all systems.

B :

connect the rack system to an IPDU and add the IPDU to the HPE. OneView instance that is used for HPE synergy management.

C :

Deploy HPE OneView Global Dashboard and add the rack systems there, as AMD systems are not directly in HPE OneView.

D : Deploy an HPE OneView virtual appliance, and, after configuration, use it to manage only the rack systems

Answer: A

Question 5

Your customer experienced some problems caused by outdated HPE Superdome Flex firmware. Which update method should they use to avoid these issues in the future?

Options :

A : HPE OneView method for I/O firmware update procedure

B : RMC CLI to update I/O and HPE Persistent Memory firmware

C : HPE OneView IT HPE Persistent Memory firmware must be updated.

D : HPE SUM if HPE Persistent Memory firmware must be updated

Answer: D

Higher Test Marks with Free Online HPE0-S59 Exam Practice

Buying Options: